For someone new to the landscape pond business, a fish pond pump is a fairly unknown piece of equipment. It’s certainly not something most landscape contractors are familiar with either, so it’s not surprising that most new customers ask their landscape contractor, “what is a fish pond pump?”. Fortunately, many people are aware of it now, and that confusion is cleared up quickly. Once you learn a little more about how they work, you’ll see why most garden pond builders choose to use pumps. Fish ponds may be a simple solution to an intricate problem, but they are no simple installation!
Fish pond pumps come in two basic varieties, submersible and surface pumps. A good rule of thumb is to avoid the term “pellet” when you’re speaking about fish pond pumps, since this refers to both types. Pellet pond pumps, which are frequently used for commercial fish pond applications, use a single motor assembly that pumps water through a series of nozzles, rather than a spinning propeller.
The low pressure version of a fish pond pump is known as a “low-pressure” pump. These are usually less powerful than the surface models, but are still quite efficient. They just don’t operate at full power like a normal pond pump does. You do have to make sure you are only installing a low-pressure pond pump in a location that doesn’t get very cold, and never install it near vegetation, stone walls, or any other obstruction that would prevent the motor from circulating properly.
Surface pond pumps, also called waterfalls, are more powerful and are able to circulate a larger volume of water. As the name suggests, the water flows over the surface of the pond. However, it is important to note that the strength of the water currents depends on how deep the fountain is, and also how much debris is in the water. If there is not enough debris in the water for the pump to circulate properly, the pump won’t be able to keep up and will eventually wear out.
There are several different brands of fish pond pump installers on the market, all of which boast the same features. Some of them, such as the Lowes brand, are relatively inexpensive and are made to be easy to install. They also come with a long cord, making them easier to use in structures that are on the ground. This is not to say that they can’t be installed in structures that are above the ground. However, there may be some difficulties involved with installing the pumps in such locations.
The best thing about a Lowes fish pond pump is that you don’t have to spend a fortune in order to get one that is high quality and performs properly. In fact, most Lowe’s pumps are made with high-quality materials so that they can stand up to heavy use and still give you excellent water flow. As a result, you don’t have to replace your pump very often. And if you have any problems, it shouldn’t cost you too much to get it repaired or replaced.
If you’re on a tight budget, or if your fish pond pump is for a garden pond rather than an installed aquatic plant, you should think about buying a used pump instead of a new one. These used pumps are often sold by companies that no longer produce them. In this case, you should be wary of the quality of the pump, but it may be well worth the money if you’re willing to shop around. You may be able to find a used pump at a cheaper price than a new one, and you won’t have to worry about replacing it as often.
Another option to consider when shopping for fish pond pumps is to visit your local home improvement store or hardware store. Many of these stores have sales on pond supplies all of the time. In some cases, you can even purchase pond pumps from the store itself. Regardless, of where you buy your pump from, remember that you should always choose one that’s made of high quality materials. The pumps you choose can make or break the look of your pond, so make sure you invest in the best.